Micro PC is an industry standard for building reliable
PC-compatible systems for control and data aquisition. Modular design,
high serviceability and robustness make Micro RC excelent choice for
system integrators.
| |
|
MicroPC CPU boards
|
Wide functionality and high reliability of these
processor modules make them an ideal choice for industrial, transportation,
and municipal engineering automation systems developers. Ethernet,
CAN and standard PC interfaces support accelerates control systems
development and implementation.
|
MicroPC Processor Module
CPC108
|
CPC108 is a compact yet fully x86compatible SBC in MicroPC format,
designed for fanless operation in harsh environments.
• AMD Geode LX800 (500 MHz) processor
• 256 MB DDR SDRAM
• Support for LCD panels (resolution up to 1600×1200)
• and CRT monitors (resolution up to 1920×1440)
• Flash disk 64 MB
• FDD/LPT (EPP, ECP) interfaces
• USB 1.1, 2.0 support
• Fast Ethernet controller 10/100 Mb/s
• Four COM ports (two isolated)
• Industrial operating temperature range: –40°C to +85°C
• Protective coating (option)
Datasheet
|
|
MicroPC CPU Module with Data Acquisition
System
CPC109
|
MicroPC CPU module, highly integrated x86 compatible solution
for use in realtime control systems, in industrial automation,
in data acquisition and processing.
• Vortex86DX™ 600 MHz
• 256 MB DDR II SDRAM soldered
• Fast Ethernet port
• CF I/II socket, 1 GB SLC NAND Flash soldered
• Four USB 2.0
• Digital I/O port: 72 CMOS/TTL lines
• 8/2 isolated analog I/O, 12 bit ADC/DAC
• Two RS-232, two RS-422/485 isolated
• Operating temperature range: - 40C...+85C
Datasheet
|
|
MicroPC processor Module
CPC150
|
AMD GEODE LX 800 based MicroPC board, fully x86compatible, designed
for operation in rugged environment.
• AMD GEODE LX 800, 500 MHz
• 256 MB DDR SDRAM
• CF I/II socket, 1 GB with IDE
• VGA, LCD (TFT or DSTN) up to 1920x1440
• Two Fast Ethernet ports
• Two RS232, two RS422/485 isolated
• Four USB 2.0
• Discrete input/output: 24 channels
• Operating temperature range: -40C...+85C
Datasheet
|
|
| |
 |
Micro PC DIO modules
|
DI32-5/DO32 modules are designed to connect discrete
isolated inputs/outputs to the system.
|
Isolated digital input card
DIC112 (DI32-5)
|
The DI32 card is designed in MicroPC format and accepts 32 isolated
digital or frequency inputs.
• 32 isolated digital input or frequency measurement channels
• Input voltage range: 3 V to 52 V (5 sub-ranges)
• Input current range: 3 to 10 mA
• Input frequency up to 30kHz / 5MHz
• Frequency or phase measurement
• Programmable debounce logic
• Interrupts generation on input events
• 1500 V isolation to system and between channels
• On-board isolated 12 V DC/DC converter for dry contact support
• Extended operating temperature
Datasheet
|
|
Isolated digital output card
DIC113 (DO32-5)
|
The DO32 card is designed in MicroPC format for switching of
32 isolated digital lines.
• 32 isolated digital output channels with isolation to
system and between channels
• Output load 60 VDC / 500 mA
• Outputs status monitoring
• Outputs reset upon power-on and on hardware reset
• 1500 VDC isolation
• Single-ended and differential load connection
• Extended operating temperature range from -40°C to +85°C
Datasheet
|
|
Programmable I/O card
DIC110 (UNIOxx-5)
|
The UNIO96/48-5 are 96/48-channel digital I/O MicroPC add-on
cards.
• 96/48 digital/frequency I/O channels programmable in any
combination
• Compatibility with digital/analog opto-isolated modules Opto-22, Grayhill
(including 73G, 73L)
• Frequency, phase measurement at any channel
• Timers/counters
• Frequency generation and pulse width modulation (PWM) at any channel
• Code conversion at any channel
• Timing diagrams generation
• Input event interrupts generation
• Programmable debounce logic
• In-System Programming
• Extended operating temperature range from -40°C to +85 °C
Datasheet
|
|
Multipurpose I/O Card
DIC111 (UNIO96-1)
|
The module is a 96-channel digital I/O card in MicroPC format.
UNIO96-1 accepts TTL-logic level signals. • 96-channel digital I/O card
• Compatibility with digital and analog opto-isolated modules Opto-22,
Grayhill (including series 73G, 73L)
• Frequency measurement at any channel
• From 9.2 to 73.0 kHz (accuracy 0.025%)
• From 9.2 to 1900 kHz (accuracy 0.5%)
• Serial signal can be transmitted or received through any line (115200,
8, 1, N)
• Programmable debounce logic time on the lines: 40 ns, 320 ns, 4 ms, 60
ms
• Programmable configuration of channels as inputs or outputs in groups:
8 groups of 8 channels; 8 groups of 4 channels; 48 groups of 2 channels
• 5 interrupt lines and a DMA channel
• Extended operating temperature range from –40°C to +85°C
Datasheet
|
|
| |
|
Micro PC card cages
|
Cost-effective and multiposition ICC card cages
allow to combine up to 12 MicroPC boards of different types in
one system. High mechanical reliability and easy mounting make
these cages suitable for most applications.
|
ISA-8 mounting cage for MicroPC
ICC19x
|
The ICC19x card cages provide three-sides fixing of cards. Moreover,
to further improve mechanical stability, an additional fixing plates
can be used. The plates are supplied with each of the card cages.
• Compatible with Octagon 51xx series power supplies
• Compatible with all MicroPC modules
• 4-side modules fixation
Datasheet
|
|
| |
|
