Início Produtos Representadas Notícias Informações Exposições Mapa do Site

PC104+ Boards

Digital input/output board:

PC104-PLUS1500 - Product specifications

32 I/O channels, with optical isolation, 24 V, for PC/104-Plus

The board PC104-PLUS1500 is a digital input/output board (24 V) for use in PC/104-Plus systems.

The input channels correspond to the industrial standard +24 V for "logic 1" for the direct connection to SPS-controls. The 16 optically isolated inputs and outputs are protected against fast transients, electrostatic discharge and high-frequency EMI. These characteristics allow the user to realize interference-free tasks in the industrial PC measurement and control.

• 16 digital inputs, 24 V, isolated, including 2 interuptible inputs
• 16 digital outputs, 24 V, isolated, 11 V to 36 V
• Output current150 mA for each channel
• Optical isolation 1000 V
• Input and output filters
• Creeping distance IEC 61010-1 (VDE4111-1)
• Watchdog for resetting the outputs on "0" (when Power-On)
• Timer
• Counter
• Protection against fast transients (burst), overvoltage, electrostatic discharge and high-frequency EMI
• Separate ground line for inputs and outputs
• Overtemperature and overvoltage protection
• Diagnostics response at short-circuit, overtemperature, voltage drop
• 24 V power outputs with protective diodes
• Shut-down logic when the external supply voltage drops below 7 V
• Delivered drivers and software samples
• Supported ADDIPACK-functions:
• Digital input, Digital output, Interrupt, Watchdog, Timer, Counter

Applications:

• Industrial I/O control
• SPS connection
• Signal switching
• Interface to electromechanical relays
• Automatic test equipment
• ON/OFF monitoring of motors, lights,...

Accessories:
FB104-1500: Ribbon cable 40-pin on 37-pin SUB-D male connector
PX 901-D: Screw terminal panel with screws, LED status display
PX 901-DG: Screw terminal panel with screws, LED status display with housing for DIN-rail
PX 9000: 3-row screw terminal board with screws for DIN-rail, LED status display
ST010: Standard round cable, shielded, twisted pairs, 2 m
ST011: Standard round cable, shielded, twisted pairs, 5 m
ST010-S: Same as ST010, for high currents (24 V supply separately)
ST021: Round cable between FB104-1500 and PX 8500-G,
ST022: Cable between PX 8500-G and PX 901-DG, shielded, 2 m
ST8500: Ribbon cable for cascading two PX 8500

copyright | bl.representações - vendas@blbrasil.com.br